 |
Product News |
|
|
 |
|
CO2/MAG/MIG welding machine series |
|
 |
‖PRODUCT INTRODUCE |
|
The most remarkable gas of new generation of quality protects the welder
(Compare With the rectification type welders (NB-K KR ,etc. ) )
● Hight efficiency welding and save energy
a , the single welder is here 35OA Welding , Work every day 6 hours , Work every year 300days , Economize electricity above 6500 degrees.
b , the input power is reduced about 35%, the capacity is required small to supplying power.
● Performance is excellent
a , Instantaneous arc-start , Success rate is higher.
b Splatter has been reduced obviously.
c, When wire of 1.2mm in diameter, the arc is stable at 80A/18V .
d , Adopt unique control circuit with voltage and current feedback, Enable welding course steadily , the change of wire extension have a good adaptability. Welding current and voltage is wide to match the range. The appearance of weld is good.
e , adopt going light ball circuit of good performance, make after welding ,Weld light ball diameter ,wire of tip with is it wire unanimous basically in diameter to use , It is high to guide arc success rate.
f , lightweight compact (about 1/3 ).
100% rated duty cycle (NB-500 ) . I deal design for heavy industry.
Main characteristic :
·Intellectual cooling fan , Dust in the reducing machine ,Increase the motor and life-span of complete machine effectively ,Better energy-conservation ,The complete machine is unloaded and power consumptive <50VA
·Protect the circuit to perfect ,Have excessive pressure , is it press , lack looks to owe, overheated passing unusual situation of shedding etc. protect ,Improve the dependability of the complete machine effectively ,Reduce the maintenance cost.
·Synchronous signal of electric arc exports the interface (Select oneself ),Do benefit to welding full-automatically.
·Welding torch , wire feed device , heater ,etc. consume one and older generation welder (NB-K, KR) totally exchange ,Do not increase users and retrofit the cost.
Main related components and parts :
a , German Siemens IGBT .
b , the recovery diode of American Motorola.
C , U.S.A. CDE Strain the electric capacity of wave.
d , Japanese Mitsubishi IGBT drives the circuit.
e , Japanese Omron relay.
f , Japan's original packaging electric potential device .
g , all imported integrated circuits o
h , the joint-venture gives the wire feed device.
j , famous-brand welding torch .
Standard configuration:
1 , A inverter welding power source.
2 , A wire feed device with10 meters cable and 10m gas hose.
3 , A 5 meters ground cable
4 , A welding torch
5 , Gas regulator with heater
Send off : Weld by hand ,The carbon arc achieves the function angrily.
|
|
|
 |
